The selection of the pump truck should be comprehensively considered according to the specific project object, characteristics, required large conveying distance, concrete construction plan, pump truck form and specific conditions. The type of building and the performance of the structural pump truck vary by type. In addition to the mixing amount of concrete, the type and structure of the building, construction technical requirements, site conditions and environment should also be considered when selecting a model. Usually the main performance parameters of the small pump should meet the construction requirements or be slightly larger. If the capacity is too large, the utilization rate is low, or too small, it will not only fail to meet the requirements, but also accelerate the wear of the pump truck.
The construction adaptability is greater than the flexibility of the pump truck. The larger the boom height, the pouring height and the distribution radius, the stronger the construction adaptability. The high-arm pump truck should be selected as much as possible during construction. The number of pump trucks used in the construction volume can be calculated according to the amount of concrete pouring, the actual throughput of a single machine and the construction time. For a large number of one-time concrete pouring pump truck construction projects, in addition to calculation, it is recommended to have a certain spare capacity. Product configuration The product performance of the pump truck should adhere to a high starting point when selecting. If you choose a small pump with high value, the standard requirements of its product also need to be improved. From interior quality to exterior quality, the quality of the main components of the product should be adapted to the high value of the vehicle. The small pump of the power system adopts full hydraulic technology, so we should consider whether all the hydraulic technology is advanced and the hydraulic forward-looking quality. Since its power comes from the engine, in addition to the engine performance and quality, the performance, carrying capacity and quality of the car chassis are also considered. Operating system The operation control system of the pump truck is equipped with manual, wired and wireless air time methods, which are convenient and flexible to be controlled by the county. The wireless remote control can be operated remotely. Once the circuit fails, manual operation can be used. After-sales service: As a special-purpose vehicle, due to its special functions, the safety of the pump truck, the mechanical performance, the after-sales service of the manufacturer and the supply of spare parts should be requested. Otherwise, once an accident occurs, it will not only affect the construction progress, but also have consequences imagined by the department. When choosing a pump truck, it is necessary not only to choose the brand, but also to choose the performance, but also to look at the production and R&D strength of the company, the production history, and the level of after-sales service and the cost-effectiveness of the product.
In addition, we recommend a pump truck from Konile Group, which is a new type of pump truck manufacturer integrating mixing station, pumping equipment and transportation. The pump is installed on the vehicle chassis and adopts full hydraulic drive, with a high degree of automation and simple operation. It is easy to maintain and move, and is very suitable for concrete construction in rural and urban-rural integration.
Address：No. 413, Tieqishan Road, Chengyang District, Qingdao