The on-board pump has been widely used in various construction parties, because it can greatly improve the efficiency of concrete transportation, so it is welcomed by the majority of construction parties. So how should the on-board pump be poured concrete during the construction process?
In fact, in the construction, many construction parties want to buy a safe and reliable on-board pump, so what kind of on-board pump is safe and reliable? In general, the on-board pump needs to comply with the inspection requirements of the following safety devices during the installation process. Specifically, there are the following points:
1.The hydraulic system should be equipped with safety devices to prevent overload and hydraulic shock. The regulating pressure of the safety valve should not exceed 110% of the rated working pressure of the system. The rated working pressure of the system should not be greater than the rated pressure of the hydraulic pump.
2.The brake of the on-board pump should be sensitive, reliable, effective and non-deviating. The stamping and traction should meet the requirements of vehicle detection. The free travel of the brake pedal should meet the manual requirements.
3.The on-board pump alarm and emergency brake switch should work reliably.
4.The platform plate and protective railing of the vehicle pumping station should be intact. Safety warning signs and related operational signs should be complete and eye-catching. The operating room should be equipped with fire extinguishing equipment.